Structural insulated panels
Compared with traditional building materials, MgO board is A1 non-combustible, water resistant and strong, and needs no special tools or treatment.
Magnesium oxide boards
Lightweight EPS MgO Board
Lightweight MgO board uses EPS particles instead of wood chips, which makes it lighter, with a lower density. It performs better in fire retardance and sound and heat insulation, and with our waterproofing technology it can be used as exterior underlayment.
- Thickness
- 3–25 mm
- Density
- 600–800 kg/m³
- Screw pull-out
- ≥ 45 N
- Edges
- Square, T&G, shiplap
- Fire resistance
- Heat resistance
- Moisture resistance
- Impact resistance
- Building safe
- Insect resistance
- Mould resistance
- Health safe
Overview
Lightweight EPS MgO board replaces wood chips with EPS particles to bring density down to 600–800 kg/m³. Jiafeng makes it 3–25 mm thick (6–12 mm standard) in 1220 × 2440, 1200 × 2750 and 1220 × 3050 mm, with square, T&G or shiplap edges, one face smooth and the back faced with non-woven fabric.
Specifications
Values as published by Jiafeng. Custom thicknesses, sizes and edges on request.
Sizes
| Thickness (mm) | Size (mm) |
|---|---|
| 6 | 1220 × 2440 |
| 8 | 1200 × 2750 |
| 10 | 1220 × 3050 |
| 12 | Other sizes made to order |
Edges: square, T&G, shiplap. Density 600–800 kg/m³. Surface: one side smooth, the other side non-woven fabric.
Technical data
| Property | Value |
|---|---|
| Thickness range | 3–25 mm |
| Screw pull-out force | ≥ 45 N |
| Waterproofing | Chloride-free |
| Raw materials | Magnesium oxide + MgSO4 + perlite + glass-fibre mesh + non-woven fabric |
| Surface finish | Slurry surface, sanded back, or standard |
Applications
Flooring
Our high-strength floor board is designed for floors, with a bending strength of up to 20 MPa. The back is sanded very flat, with a tolerance under 0.02 mm, and shiplap and other edges make installation quick.
Interior decoration
Strength and fire performance make MgO board well suited to interior construction.
Partition walls
Suits partition walls on steel or timber frames, with good fire, heat and sound insulation.
Related products
Often specified together
EPS MgO Board
6, 8, 10, 12 mm0.8–1.0 t/m³
Lightweight MgSO4 board with EPS particles, 6–12 mm, as a substrate for decorative walls.
View product
Exterior MgO Cement Board
8–12 mm≥ 0.9 t/m³
Waterproofed MgO board with EPS particles for render, tile and cladding backer walls, 8–12 mm.
View product
Structural MgO Sheathing
12, 15 mm11,300 kPa
Compressed magnesium oxysulfate sheathing with OSB-like screw holding, 12 and 15 mm.
View productQuotation
Tell us about your project
Send the board type, thickness, size and quantity. We reply with a quotation, loading plan and lead time — usually within 2 hours on working days.
- Your requirementsProduct, thickness, size, edges and the application.
- Quotation and samplesPrice per sheet and per container, and samples for testing.
- Production and shippingTested in our laboratory, packed on pallets, shipped from Shanghai or Ningbo.
Request a quotation
We use your details only to answer your inquiry. See our privacy policy.