Magnesium oxide boards

MgO Floor

Made from magnesium oxide, magnesium sulfate (MgSO4) and bamboo filler, reinforced with glass-fibre mesh. Based on the latest cement and fibre-reinforcement technology, this fire-rated MgSO4 floor combines high strength with low weight and cost.

Thickness
15, 18, 19 mm
Bending strength
≥ 20–25 MPa
Density
1.15 t/m³
Fire
12 mm > 120 min
  • Fire resistance
  • Heat resistance
  • Moisture resistance
  • Impact resistance
  • Building safe
  • Insect resistance
  • Mould resistance
  • Health safe

Overview

Jiafeng MgO Floor is a load-bearing MgSO4 subfloor board for internal and external subflooring and decking. It is 15, 18 or 19 mm thick in 1220 × 2440 mm or 600 × 2700 mm, density 1.15 t/m³, bending strength ≥ 20–25 MPa, with T&G or shiplap edges; 12 mm board exceeds a 120-minute fire rating.

It resists fire, water, mould, sound and heat. Structural floors made with it are lighter than precast or poured concrete, install much like timber decking, and resist mildew, moisture and termites. Tongue-and-groove and shiplap edges are available.

Specifications

Values as published by Jiafeng. Custom thicknesses, sizes and edges on request.

Technical data

PropertyValue
ProductLoad-bearing MgSO4 subfloor board
CompositionMgO + MgSO4 + glass fibre + bamboo fibre
Length8 ft (2440 mm), 9 ft (2700 mm), custom
Width4 ft (1220 mm), 2 ft (600 mm), custom
Thickness15, 18, 19 mm
UseInternal and external subflooring and decking
ColourGrey and white
SurfaceSmooth one side, sanded back
EdgesTongue and groove, shiplap
Density1.15 t/m³
Combustibility / fire ratingNon-combustible; 12 mm exceeds a 120-minute fire rating
Moisture content≤ 8%
Bending strength≥ 20–25 MPa
Impact strength> 9 kJ/m²
Modulus of elasticity> 5000 MPa
Dry shrinkage≤ 0.3%
Wet expansion rate≤ 0.3%
Thermal conductivity~0.44 W/m·K
Thermal expansion (+20 °C to −20 °C)0.01 mm/m·°C
Surface alkalinitypH 8–10
Asbestos analysisAbsent – not measurable
Formaldehyde analysisAbsent – not measurable
TVOC (ASTM D5116-10)Below measurable levels of the test instruments
Chloride ion content (ASTM C871-11)0.012%

Features

  • PropertiesFireproof, impact resistant, moisture resistant, insect resistant, mould resistant, heat resistant, free of pollutants and safe for health.
Layer structure of MgO floor board: facial surface, glass-fibre mesh, MgO filler and non-woven fabric
Board structure

Applications

  • Internal subflooring
  • External subflooring
  • Decking
  • Light-steel and timber-frame floors

Exterior applications

5 uses
  • Wall sheathing
  • Fascia
  • Soffit
  • Trim
  • Lap siding

Interior applications

5 uses
  • Wall panels
  • Ceiling board
  • Tile backer
  • Drop ceiling tiles
  • Fire wall system

Flooring applications

4 uses
  • Lightweight floor system (LFS) flooring
  • Prefabricated loft flooring
  • Fireproof access flooring
  • Subflooring

Multifunctional applications

7 uses
  • Fire-resistant furniture substrate
  • Tunnel wall panels
  • Structural insulated panels (SIPs)
  • Shear wall panel
  • Fireproof door
  • Laminated wallboard substrates
  • Substrate replacing SPC or PVC cores in laminate floors
Quotation

Tell us about your project

Send the board type, thickness, size and quantity. We reply with a quotation, loading plan and lead time — usually within 2 hours on working days.

  1. Your requirementsProduct, thickness, size, edges and the application.
  2. Quotation and samplesPrice per sheet and per container, and samples for testing.
  3. Production and shippingTested in our laboratory, packed on pallets, shipped from Shanghai or Ningbo.

Request a quotation

+ code
Drawings, photos or specifications

We use your details only to answer your inquiry. See our privacy policy.